Defender 710
Defender 710
1 to 4-sided boltwork for CEN II-V frames.
Two patented fronts in the form of integrated solid steel elements
thanks to the shaft support, a very high manipulation protection is achieved. Opening
during the operation, the blockage is released by the forward movement of shafts II and III.
is released. Then shaft I is retracted.
2 defined locking in locked operation
there is no order.
Details
·
Base plate dimensions 224 x 420 mm
·
Installation applications
o 2 lock operations
o 3-sided (front shaft I, top shaft II, bottom shaft III)
o Shaft I 25 mm, shaft II/III 34 mm throw, arm opening angle 110°
o Shaft connections: Ø 10.5 mm
o Lock assembly: 4 M6 threaded bushings
o Mounting position of locks: vertical, bolt up/down, bolt throw 8.7 - 12 mm, blocking of horizontal shafts
o Clockwise opening for right-hand doors
· Manipulation protection
o Support shaft I is released by the forward movement of shafts II/III
o 2 integrated re-lockers, lock in locking position
o Prepared for use with glass plates
o Indirect blocking point
·
Steel chrome plated
·
Gear drive with follower 11 mm
·
Prepared for Ristow-Element 4.4
·
Approx. weight 7,770 g
Options
·
1-sided (front shaft I) - Option code: SES
·
2-sided (front shaft I, top shaft II) - Option code: SZS
·
4-sided - Option code: SVS
·
Single lock operation, matching the second lock position with the operating lock - Option code: ESB
·
3 integrated re-locker, lock in locking position - Option code: REI
·
For left doors, opens counterclockwise - Option code: SLG
·
Special types on request
Accessories
· Screw to block the lock from slipping (2 screws required per lock) - Order no: 1260400137
·
Bolt spacer plate for combination locks, 8.7 mm throw - Order no: 2140 000 010
·
Connection set for right-hand doors Ristow-Element 4.4 - Order no: 318000110
Connection set for left-hand doors Ristow-Element 4.4 - Order no: 318000100