SVP / M-SVP-S Kontrol
SVP / M-SVP-S Control
SVP and M-SVP control units, dormakaba engine
locks can be used with a wide range of functions. Depending on the model
and access control systems or intercoms for short-term and
in addition to the traditional activation functions of permanent door openings,
latch locking function during daytime function, for actuation pulses
it is possible to trigger other functions such as automatic drives. Alarm systems
signals for the electrical connection of the access control/input for the GMA
cut, etc. Analyze various types of feedback on the state of the lock
is also possible.
·
Requirement for activation of dormakaba engine locks
·
Providing feedback on lock status
·
Automatic operation connection
·
Special functions depending on the version
·
Special functions, e.g. timer, networking, etc.
·
Versions with or without power supply unit
Details
SVP-S 2x DCW®
It is used for the integration of SVP 4000/6000 locks into TMS escape route security systems. It features freely programmable inputs and outputs for door opening control or feedback output as well as an integrated timer and LON/LAN connectivity. Available in different hardware variants.
SVP-S 4x DCW®
Control unit for operating SVP 2000 DCW® or M-SVP 2200 DCW® emergency escape locks with automatic locking action in stand-alone mode; connected to the lock via the DCW® system bus.
Freely programmable inputs and outputs for controlling door opening functions or for feedback output, as well as an integrated timer and LON/LAN connection possibility. Available with different hardware types.
M-SVP 2000 Control Unit
Provides optional external surface mounted control with power supply unit for M-SVP 2000 multipoint locks, which can be used instead of the internal control that accompanies the locks.
M-SVP 3000 Control Unit
To activate the M-SVP 3000 and M-SVP 3500 multi-point locking systems, the power supply unit is fixed by surface mounting. It provides input and output information to control door opening functions and output feedback.